Pairs well with

A Pro Series built around daily control

Choose the output that fits the setup - 1000VA LiFePO4 UPS PRO Series 8-Outlet NAS

Choose the output that fits the setup

The Pro Series offers 600 W and 800 W configurations, so a storage-focused setup and a fuller workstation can use the same familiar UPS format.

Read power conditions without opening an app - 1000VA LiFePO4 UPS PRO Series 8-Outlet NAS

Read power conditions without opening an app

The front display keeps input, output and battery status visible during normal use and the first moments of an outage.

Quiet the alert when the room needs it - 1000VA LiFePO4 UPS PRO Series 8-Outlet NAS

Quiet the alert when the room needs it

A one-touch mute control lets the UPS stay on duty beside a home office or nighttime network setup without leaving the buzzer active.

Technical specifications

Product

Model number
1000VA PRO Series

Power

Apparent power
1000 VA
Active power
600 / 800 W

Physical

Form factor
Desktop
Dimensions (L × W × H)
330 × 250 × 105 mm
Net weight
4.8 / 5.6 kg
Color
Black / White

Input

Input voltage range
90–140 (±5) V
Input frequency
50/60 ±3 Hz
Input protection
250V~, 15A protector

Output

Output voltage
120 ±10% V
Output frequency
60 ±3 Hz
Output waveform
Pure Sine Wave
Transfer time
≤20 ms
Output THD
<5 %
Outlet / plug type
NEMA 5-15
Total outlets
8

Runtime

Reference load
300 / 400 W
Backup time
≤25 / ≤30 min
Recommended load range
360–420 / 480–560 W

Built-in battery

Battery chemistry
LiFePO4
Battery nominal voltage
25.6 V
Battery capacity
6 / 9 Ah
Battery energy
153.6 / 230.4 Wh
Recharge time
≤6 / ≤10 h
Cycle life
3000+ cycles

Environment

Noise
≤40 @1m dB
Cooling
Fan
Operating temperature
0–40 °C
Storage temperature
-15–40 °C
Operating humidity
20–90, non-condensing %RH

Frequently asked questions

How long will it run after the power goes out?

Under the published reference condition, the 600 W configuration provides up to 25 minutes at a 300 W reference load; the 800 W configuration provides up to 30 minutes at a 400 W reference load. Actual runtime varies with connected load, temperature and battery condition.

What output waveform and transfer time does it use?

The UPS uses Pure Sine Wave output with a specified transfer time of ≤20 ms. Compatibility still depends on the connected equipment and its power requirements.

How long does the built-in battery take to recharge?

The published recharge time is ≤6 hours for 600 W / ≤10 hours for 800 W. Recharge time can vary with battery state, load and operating conditions; recharge the unit promptly after a low-battery event.

What outlets or communication interfaces are included?

8 NEMA 5-15 outlets and the product’s NAS/PC communication interface. Use only the supplied or specified cable and follow the product instructions for any communication or NAS shutdown integration.

What load and maintenance limits should I follow?

Do not exceed the rated output of the selected configuration: 600 W or 800 W. Keep the UPS in a dry, ventilated indoor location, and stop use if it shows abnormal heat, odor, deformation or fault indications. Battery maintenance or replacement should be handled by qualified personnel.